Announcement

Collapse

Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage: www.studebakerdriversclub.com/tips.asp
See more
See less

can you identify my engine?

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Dwain G.
    replied
    I totally missed that! Good catch Rich!
    Jeremy, I assumed you have a pickup. Is this a bigger truck?

    Dwain G.

    Leave a comment:


  • StudeRich
    replied
    Jeremy, you are looking at a RAISED casting number, with a 4 for shift or machine # in front of it. Serial numbers are never raised, always stamped after casting. That way they can change on each casting made in the die. That sounds like the casting number of a '51-'54 Commander 232 V-8 block. Just give us the STAMPED engine number from the machined pad at the driver's side front corner of the block next to the filler pipe, if it's a V-8 conversion or left side uppper, front on small and large 6's. Hope this helps, Rich.

    quote:Originally posted by Jeremy C.

    My truch is a 1953 c cab. I was missing one number so the number on the block in the front is 4527644. If anyone can tell me the ci of this I would be very appreciative.
    StudeRich
    Ferndale, WA

    Leave a comment:


  • Dwain G.
    replied
    I could understand it if the '4' was really an 'H', or if the '5' was really an 'R'. Look for the casting number on the distributor side of the engine block. That will help narrow it down a little. A 1953 engine should be 524807 or 523140

    Dwain G.

    Leave a comment:


  • Dick Steinkamp
    replied
    quote:Originally posted by Jeremy C.

    My truch is a 1953 c cab. I was missing one number so the number on the block in the front is 4527644. If anyone can tell me the ci of this I would be very appreciative.
    That number doesn't cross to anything listed on the SDC 6 cylinder engine number page...

    http://www.studebakerdriversclub.com/tech_6data.asp

    If it is the original engine, it should begin with a 1R, 2R, 3R, 4R, or 6R



    Leave a comment:


  • Guest's Avatar
    Guest replied
    My truch is a 1953 c cab. I was missing one number so the number on the block in the front is 4527644. If anyone can tell me the ci of this I would be very appreciative.

    Leave a comment:


  • studeclunker
    replied
    Judging by the number I would guess the motor in question is a six? If so the tech tips section of this site's home page lists this as follows:
    527644 1950 Champion (9G) 170"

    Lotsa Larks!
    K.I.S.S. Keep It Simple Studebaker!
    Ron Smith

    Leave a comment:


  • Guest's Avatar
    Guest started a topic can you identify my engine?

    can you identify my engine?

    Can anyone tell me what the engine is in my 53 studebaker truck? The number is 527644. It is located in the front of the engine to the left of the oil on passenger side and it is stamped. Thanks.
Working...
X