Announcement

Collapse
No announcement yet.

1940 6cyl fuel pump

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Jimmy
    Guest replied
    Thanks guys.
    I found some numbers in case someone else has this problem.
    Airtex #527 available online from Airtex
    original equip: Fp469cd
    Electric: Borge-Warner EP11 and A9349

    Thanks again for the reply.

    Regards,
    Jimmy

    Leave a comment:


  • Mike
    replied
    "Buy the kit or rebuilt pump from a STUDEBAKER parts vendor." They probably buy them from:
    http://www.then-now.com/The_Cellar/cellar.htm .
    At least there's some good info on the Parts Cellar site.
    Their kit, from SI, arrived without instructions; and with an older version of the stem seal washer. The Cellar sent me the formed washers for the stem seal, directions; and a note about how he was losing money doing this stuff.
    You do need those directions. Some of the parts in the kit are a little different - I thought I had the wrong kit, at first.
    Mike M.

    Leave a comment:


  • Roscomacaw
    replied
    Jimmy, don't make the mistake of buying some old repair parts to fix your pump. The old rubber and the new formula gasoline will be a recipie for yet another breakdown![xx(] Buy the kit or rebuilt pump from a STUDEBAKER parts vendor.


    Miscreant at large.

    1957 Transtar 1/2ton
    1960 Larkvertible V8
    1958 Provincial wagon
    1953 Commander coupe
    1957 President 2-dr
    1955 President State
    1951 Champion Biz cpe
    1963 Daytona project FS

    Leave a comment:


  • JDP
    replied
    There is none, just order a kit from one of the Studebaker parts vendors.

    Studebaker On The Net http://stude.com
    64 R2 4 speed Challenger
    63 R2 4 speed GT Hawk
    63 Daytona Convert.

    Leave a comment:


  • Jimmy
    Guest started a topic 1940 6cyl fuel pump

    1940 6cyl fuel pump

    I have a 1940 commander 6 cyl with a blown fuel pump diaphragm. Does anyone know the modern part number for this pump or a crossover part?

    Thanks,
    Jimmy
Working...
X