Announcement

Collapse

Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage: www.studebakerdriversclub.com/tips.asp
See more
See less

I need a part number..

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • I need a part number..

    for the front "outrigger" frame member that the front body mount attaches to. I need the numbers for both sides. I checked my parts book and I can't seem to find it. All I see is the basic frame-the outriggers aren't shown. However, they are shown in the body parts catalogue only to illustrate the mounts.. I'm hoping NOS members are still available or if not, good rust free ones..
    Thanks
    Todd


    63 Lark 2dr Sedan

  • #2
    Check Classic Enterprises. They have them for coupes and hts, and for lark types they have something called a floor support, that sounds like it could be what you want. TW or www.ClassicEnt.com

    Paul R

    Comment


    • #3
      Also, it seems that much of the stock they have at SASCO is for 60's Larks, including lots of body parts. I'm sure they can help you by phone since you can't spot a part number in the book.

      1955 1/2 Ton Pickup

      Paul Simpson
      "DilloCrafter"

      1955 1/2 Ton Pickup
      The Red-Headed Amazon
      Deep in the heart of Texas

      Comment


      • #4
        Thanks Paul. Classic Enterprises has them.
        Todd


        63 Lark 2dr Sedan

        Comment

        Working...
        X