Announcement

Collapse
No announcement yet.

bolt pattern

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • DilloCrafter
    replied
    Welcome, Tirebiter! I asked the same question, since I have a similar truck. Check out this thread, there are some very helpful links further down in it:
    http://www.studebakerdriversclub.com...?TOPIC_ID=1471

    1955 1/2 Ton Pickup

    Leave a comment:


  • tirebiter4659
    replied
    allo all,, new 'ere,,

    I am trying to buy wheels for my 54 Stude truck and I'm guessing that chevy 5 on 5's will interchange? That whole recessed bolt circle has me concerned....

    and speaking of 6V wiper motors,,,, is there a easy interchange for my truck from vacuum to 6V?

    whatta forum!!

    Leave a comment:


  • Roscomacaw
    replied
    5 on 5 pattern. FOR SURE.

    Miscreant at large.

    1957 Transtar 1/2ton
    1960 Larkvertible V8
    1958 Provincial wagon
    1953 Commander coupe
    1957 President 2-dr
    1955 President State
    1951 Champion Biz cpe
    1963 Daytona project FS

    Leave a comment:


  • Dwain G.
    replied
    It is a 15 X 6 wheel with a 5 on 5 bolt pattern. This can be proven by reconciling part numbers for wheels, brake drums and hubs with the same numbers in the truck parts books. But like a truck, just any old wheel may not fit the drum properly because the bolt circle is recessed. (You'll see when you remove the old wheel) For loading-unloading purposes though I wouldn't worry about that if you aren't actually purchasing wheels yet.

    Dwain G.

    Leave a comment:


  • Alan
    replied
    You will have to measure it yourself. I have a 63 Champ truck that had 5 on 5 rims but I have 71 Dodge Charger 11 1/2 discs and a Ford 9" in the rear that came from Currie with 5 on 4 1/2" now some guys around here will want to argue with you all day about the pattern the only way is to get out the tape. Measure from center of one stud to the center of another in line 5 on 4 1/2" will be approx. 2.650" and 5 on 5 will be approx. 2.975"

    Leave a comment:


  • Guest's Avatar
    Guest replied
    That is exactly the problem I have....I have had people tell me both answers.....I need someone who has a car and KNOWS FOR SURE!!!

    put you left foot in....put your left foot out

    Leave a comment:


  • N8N
    replied
    Are you sure? Some of the earlier cars had a larger pattern. I know a '41 Commander used something like 5 on 5.

    nate

    --
    55 Commander Starlight
    62 Daytona hardtop
    http://home.comcast.net/~njnagel

    Leave a comment:


  • 60Lark
    replied
    The hole pattern is 5 on 4 1/2"

    Studebaker Fever
    60 Lark
    51 Champion
    Phil

    Leave a comment:


  • Guest's Avatar
    Guest started a topic bolt pattern

    bolt pattern

    I just bought a 47 commander starlight coupe. I need to know what the rim bolt pattern is. I want to bring some rims and tires to aid in loading this thing. I heard it is five on five, like a chevy truck, is this right?

    put you left foot in....put your left foot out
Working...
X