Announcement

Collapse

Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage: www.studebakerdriversclub.com/tips.asp
See more
See less

flex tube

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 60Lark
    replied
    I bought mine from J.C. Whitney


    Studebaker Fever
    60 Lark
    51 Champion
    Phil
    Arnold, Missouri

    Leave a comment:


  • JDP
    replied
    I order it from by local auto parts store, they car get it in any size. (Mine is made by Dayco)

    64 Commander 2 dr.
    64 Daytona HT
    63 R2 4 speed GT Hawk (Black)
    63 Avanti R1
    63 Daytona convert
    63 Lark 2 door
    63 Lark 2 door #2
    62 Daytona HT/ 4 speed
    62 Lark 2 door
    60 Lark HT
    60 Hawk
    59 3E truck
    52 Starliner
    51 Commander

    Leave a comment:


  • Dick Steinkamp
    replied
    Congrats, Lou! [8D]

    As Bob says, check out SASCO or SI for that hose. It's on page 114 of SI's catalog...

    http://www.studebaker-intl.com/Resources/Part%206.pdf

    While you're at it, pick up the shop manual, as well as the chassis and body parts catalogs. You'll need them.

    Here's links to a lot of the Studebaker vendors...

    http://www.studebakervendors.com/

    Most important of all, Join the Studebaker Driver's Club...

    http://www.studebakerdriversclub.com/aboutsdc.asp

    ...and the North Puget Sound Chapter...

    http://lightning.prohosting.com/%7Enpssdc/index.html

    You'll be glad you did!

    Hope to see you and that new Hawk at a few shows this year. Bring it on up to Bellingham on the 25th of this month for Leprechaun Daze. A great show in Downtown Bellingham. They close off Railroad Avenue for the show.


    Leave a comment:


  • Roscomacaw
    replied
    Lou,

    I think SASCO or SI would have this stuff. If you didn't care about originality, you could get some 4" flexible dryer (clothes dryer) vent pipe and make it work.

    Miscreant adrift in
    the BerStuda Triangle


    1957 Transtar 1/2ton
    1960 Larkvertible V8
    1958 Provincial wagon
    1953 Commander coupe

    Leave a comment:


  • dynolou2
    started a topic flex tube

    flex tube

    I have just purchased a 62 Hawk GT, the flex tube that goes to the under seat heater is in pieces. Where are these available from? Is there an easy substitute available? Hello Mr. Steinkamp, talked to you a couple of weeks ago about Hawks. Lou [8D] enjoying todays sunshine
Working...
X