Announcement

Collapse

Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage: www.studebakerdriversclub.com/tips.asp
See more
See less

hei dist for 6 cyl stude

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • hei dist for 6 cyl stude

    Has any one done this before. I've put them on stovebolt sixes and a few amc sixes and v8 motors. The dist in the old 61 Lark VI I have is wore slam out. The old car is a dayly driver not worth restoring I'm just trying to keep it on the road reliably

    thanks Tony

    61 Lark
    61 Lark Cruser VIII

  • #2
    I had one done by Dave LeVesque years ago. Worked fine.
    He has a website
    http://www.steeltechsolutions.com/

    Comment


    • #3
      Any idea what they used for a donner

      Thanks Tony

      61 Lark
      61 Lark Cruser VIII

      Comment


      • #4
        Dont remember, that was about 12-to- 20 years ago.
        Call him or email him. He might tell ya.

        Comment


        • #5
          I talked to Dave some time ago and he said he had quit doing the HEI since the Pertronix units were available, much cheaper than he could do the HEI. You might be able to twist his arm but he is supposedly up to his eyeballs in brake kits.

          Dan White
          64 R1 GT
          64 R2 GT
          Dan White
          64 R1 GT
          64 R2 GT
          58 C Cab
          57 Broadmoor (Marvin)

          Comment


          • #6
            Dave T-Bow has just finished a custom billet, all electronic performance distributor for the sixes and the V8 is on the way.

            Studebaker On The Net http://stude.com
            64 R2 4 speed Challenger (Plain Wrapper)
            63 R2 4 speed GT Hawk
            JDP Maryland

            Comment


            • #7
              Thanks for the info. I have a 6 cyl hei from a old chevy I think I'll give it a try and see if it might work.

              Tony

              61 Lark
              61 Lark Cruser VIII

              Comment

              Working...
              X