Announcement

Collapse
No announcement yet.

valve cover gaskets

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Chicken Hawk
    replied
    [quote]quote:Originally posted by Dick Steinkamp

    Originally posted by Chicken Hawk

    The early four bolt cover (four per cover) take a smaller gasket (width of the gasket)than the later two bolt covers. Either will work but better fit if you use the correct ones.

    Ted
    Tx Ted. I learn something about these cars every day.

    Are you going to be in Spokane?

    -Dick-


    Afraid not. Would like to but just too many things I need to get done here. Hope to make Nebraska next year.

    Ted

    Leave a comment:


  • Dick Steinkamp
    replied
    quote:Originally posted by Chicken Hawk

    The early four bolt cover (four per cover) take a smaller gasket (width of the gasket)than the later two bolt covers. Either will work but better fit if you use the correct ones.

    Ted
    Tx Ted. I learn something about these cars every day.

    Are you going to be in Spokane?

    -Dick-

    Leave a comment:


  • JDP
    replied
    Same size, but there is a early and late design, but I think either will work.

    Studebaker On The Net http://stude.com
    64 R2 4 speed Challenger (Plain Wrapper)
    63 R2 4 speed GT Hawk

    Leave a comment:


  • Chicken Hawk
    replied
    The early four bolt cover (four per cover) take a smaller gasket (width of the gasket)than the later two bolt covers. Either will work but better fit if you use the correct ones.

    Ted


    A re a 233 cubic inch engine and 259 CI the same gasket size?
    [/quote]

    All Stude V8's (232, 259, 289) would use the same valve cover gaskets. All 232's would require 8 hold down bolt seals. Only the early 259's and 289's require 8...the later ones 4.

    -Dick-
    [/quote]

    Leave a comment:


  • N8N
    replied
    Get the neoprene gaskets if you can,they are reusable

    nate

    --
    55 Commander Starlight
    62 Daytona hardtop
    http://home.comcast.net/~njnagel

    Leave a comment:


  • Dick Steinkamp
    replied
    quote:Originally posted by chopsoldlady




    A re a 233 cubic inch engine and 259 CI the same gasket size?
    All Stude V8's (232, 259, 289) would use the same valve cover gaskets. All 232's would require 8 hold down bolt seals. Only the early 259's and 289's require 8...the later ones 4.

    -Dick-

    Leave a comment:


  • Guest's Avatar
    Guest started a topic valve cover gaskets

    valve cover gaskets




    A re a 233 cubic inch engine and 259 CI the same gasket size?
Working...
X