Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage:
See more
See less

gas gauge

This topic is closed.
  • Filter
  • Time
  • Show
Clear All
new posts

  • Roscomacaw
    It could be or it could be the gage. Tough to tell. After my recent trials with the gage & sender in my 58, I'm not sure you CAN get an accurate reading!
    With a new sender and a new gage, I managed (after much fiddling) to get fairly accurate readings when I had the tank and the gage on a bench. Once installed in the car (WITH a ground wire added from sender body to car body, no less) the readings make no sense at all!
    For now, I'm addressing other facets of the car. Eventually, I'll play with the gas gage again. Someday.[}]

    Miscreant at large.

    1957 Transtar 1/2ton
    1960 Larkvertible V8
    1958 Provincial wagon
    1953 Commander coupe
    1957 President 2-dr
    1955 President State
    1951 Champion Biz cpe
    1963 Daytona project FS

    Leave a comment:

  • Guest's Avatar
    Guest started a topic gas gauge

    gas gauge

    The gas gauge on my '57 Hawk does not read acurately. Never goes past 3/4 or lower than 1/4. Sound like the sending unit? Thanks.