Announcement

Collapse
No announcement yet.

Spark plug wires

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • wayne
    replied
    Thank you very much. I have entered the Newport hill climb the last 3 years and have done well and I was not sure how well the new style wires work on the older cars.

    Leave a comment:


  • Roscomacaw
    replied
    Go with the modern wires. There's no real advantage to the copper ones unless you just like static in your radio.[xx(]

    Miscreant at large.

    1957 Transtar 1/2ton
    1960 Larkvertible V8
    1958 Provincial wagon
    1953 Commander coupe
    1957 President 2-dr
    1955 President State
    1951 Champion Biz cpe
    1963 Daytona project FS

    Leave a comment:


  • wayne
    replied
    I appreciate the input but I was wondering if there has been someone who has used the modern wire as oppossed to copper wire and pro & con of both. I can get both but not sure witch way yo go.

    Leave a comment:


  • N8N
    replied
    Brian Scott makes a nice set of V-8 wires; check with JDP or Ray Fichthorn, I know those two sell them. Perhaps some other vendors as well (SASCO?)

    nate

    --
    55 Commander Starlight
    62 Daytona hardtop
    http://home.comcast.net/~njnagel

    Leave a comment:


  • Guest's Avatar
    Guest started a topic Spark plug wires

    Spark plug wires

    I have a 1951 Commander that is still running 6 volt system and I want to replace the spark plug wires. Is there any advantage in keeping the solid copper wire over the newer type? I have installed a musical horn that works fine until I start the engine then I get alot of interference . I am running horn off of 2 6volt lantern batterys hooked in series so there is no conection to the charging system and I know the spark plug wires are bad.
Working...
X