Announcement

Collapse
No announcement yet.

Chevy Valve Conversion

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Kdancy
    replied
    Doesn't the bore need to be at least 30 over to have enough clearence for the larger valves?

    53commander HDTP
    53 Champion HDTP
    64 Champ long bed V8
    64 GT

    Leave a comment:


  • Dan White
    replied
    I have had two chevy valve conversions done, One with hardened seats and one without (for my R1). The only reason I had the one with is for my turbocharged setup that I am working on. The hardened seats are not really necessary on a regular engine. The one without was really not much more than the R3 conversion since both take a bit of work. The nice thing abou the chevy valves is that you have a good deal of choice of what kind of valve to use. I got the SS Manley Proflo valves with Teflon valve stem seals. I had Dave Levesque do mine and he did a port and polish at the same time.





    Dan White
    64 R1 GT
    64 R2 GT

    Leave a comment:


  • Roscomacaw
    replied
    Better breathing is the result but I'd just go with R3 Stude valves and forget the hardened seats. Stude engines do not need the hardened seats. You're just adding 16 more parts to the engine and extra dough to the machine shop's till.[}]
    Oh, and you have to cut down the rocker stands to use the Chevy valve train. Not so with the Stude valves. IF you think you're going to be regularly spinning it up past 5 grand, you can save a bit of valve train weight with the Chevy conversion. You can use aluminum VW pushrods to help in that respect also.[:I]

    Miscreant at large.

    Leave a comment:


  • mjeansonne
    Guest started a topic Chevy Valve Conversion

    Chevy Valve Conversion

    I have found a V-8 engine from a 1958 Transtar Deluxe that is running to replace the 259 V-8 in my 1963 Champ which is frozen and won't turn. I have heard about the the Chevy Valve Conversion and may consider it when upgrading the new heads to hardened valves and valve seats. What is necessary to accomplish such a conversion and what, if any, benefits can I expect?
Working...
X