Announcement

Collapse
No announcement yet.

Aluminum casting

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    quote:Originally posted by Kdancy

    I hope you are not talking about a copy of the cast iron intake manifold but a totally new design Stude manifold. A copy won't help performance as the stock design really sucks.

    53commander HDTP
    53 Champion HDTP
    64 Champ long bed V8
    64 GT
    Not tryin' to be 007, but I promised to keep my lip zipped. [8] However, I can say this, I'm a very hard guy to please, but from what we've been working on, and what I've seen, even I might be happy. If, after a little testing of the two, (and mebbe three), setups pans out, it will satisfy the frugalness and performance bugs in all of us. [^]

    Sonny
    http://RacingStudebakers.com
    Sonny
    http://RacingStudebakers.com

    Comment


    • #17
      Sounds great, I hope the end result will be something of a low profile so I won't have any clearance problems on my 53 [as space is an issue]. Thanks for the heads up, Dclewallen

      Darryl C. Lewallen
      Darryl C. Lewallen Clarkesville, Ga.

      Comment


      • #18
        This is probably way out there, but what about an aluminum Stude block cored for the 340 cu in. setup that was still born? I also dable in Pontiac stuff and you can now get aluminum 455 blocks and I just read where someone is now casting big block Buick blocks!

        Dan White

        Dan White
        64 R1 GT
        Dan White
        64 R1 GT
        64 R2 GT
        58 C Cab
        57 Broadmoor (Marvin)

        Comment


        • #19
          Aluminum block would be great but I doubt you could get the price down in "studebaker" range.

          53commander HDTP
          53 Champion HDTP
          64 Champ long bed V8
          64 GT
          64 Champ long bed V8
          55/53 Studebaker President S/R
          53 Hudson Super Wasp Coupe

          Comment


          • #20
            quote:Originally posted by Kdancy

            Aluminum block would be great but I doubt you could get the price down in "studebaker" range.

            53commander HDTP
            53 Champion HDTP
            64 Champ long bed V8
            64 GT
            I laughed my azz off KD, you hit that one right on the head!

            Sonny
            http://RacingStudebakers.com
            Sonny
            http://RacingStudebakers.com

            Comment


            • #21
              On the aluminum intake topic. Is this intake in the works or available now and how and where can I get one or at least information on it???? Thanks, dclewallen

              Darryl C. Lewallen
              Darryl C. Lewallen Clarkesville, Ga.

              Comment

              Working...
              X