Announcement

Collapse

Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage: www.studebakerdriversclub.com/tips.asp
See more
See less

brakes

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • brakes

    i have a single line master cylinder brake system in my car. i would like to install a double line system (one line for the front and one for the rear) i was wonder if any has done this conversion and what new master cylinder did you use, and how difficult it was, if at all. i have a 63 lark drum brakes all around.

  • #2
    All '63 Larks with drum brakes had a dual master cylinder/split brake system from the factory, except for the very cheapest model(s). All that you need to do is use the parts from most any '63 Lark that has drum brakes and dual master cylinder. Use new, replacement parts for the master cylinder and lines.
    Gary L.
    Wappinger, NY

    SDC member since 1968
    Studebaker enthusiast much longer

    Comment

    Working...
    X