Wheel interchange

[scottdancer]

Could someone point me to the wheel interchange for my 53 coupe. I searhed without luck. Seems like it was ford and chrysler, but what years? Thanks, Scott

[Kurt]

Any 5 on 4.5 should work. Ford or Chrysler. If you have disk brakes make sure those wheels will fit over the caliper. Most wheels from the mid 70's to the present will work on disk brakes.

66 Commander R1 Clone
51 Commander 4dr

[doug]

American Motors wheels from the '70s with 4.5" bolt pattern work. If you use Ford wheels, use Ford lug nuts.

[Tom Bredehoft]

As mentioned, Ford or Chrysler, but REAR WHEEL DRIVE ONLY.

[img=left]http://www.alink.com/personal/tbredehoft/Avatar1.jpg[/img=left]
Tom Bredehoft
'53 Commander Coupe (since 1959)
'55 President (6H Y6) State Sedan
....On the road, again....
'05 Legacy Ltd Wagon
All Indiana built cars

[Edsel G. Tattooer]

quote:Originally posted by doug

American Motors wheels from the '70s with 4.5" bolt pattern work. If you use Ford wheels, use Ford lug nuts.

Why does this matter? I dont understand?

[Lark Parker]

See lug nut disdcussion here:

http://forum.studebakerdriversclub.com/topic.asp?TOPIC_ID=39830&SearchTerms=lug+nuts

LP

[HammondA100]

My 83 AMC Eagle wheels fit EXACTLY on the Hawk. Lucked out having the right car so I can just swap tires if needed.


Wow, someone in this town has something other than a Chevy!!