No announcement yet.

53 coupe door glass and channels

  • Filter
  • Time
  • Show
Clear All
new posts

  • ralt12
    I got replacements from these guys:

    '53 Commander
    Art Morrison chassis
    LS6 ASA/4L60E

    Leave a comment:

  • kurtruk
    An auto glass shop that has been around awhile should also be able to order the channels and felts from their glass supplier.

    (read it backwards)

    Nothing is politically right which is morally wrong. -A. Lincoln

    Leave a comment:

  • sweetolbob

    Just a couple of thoughts.

    I bought all the parts except glass for my 54 for Studebaker International. But I'll bet any Stude vendor can supply those.

    The glass was a different story. I was going to buy locally for the glass outfit that supplied the glass for several previous cars. They changed hands and the price quoted by the new folks was 2 1/2 X more for one piece than I bought two pieces for over the internet. Moral of the story, shop around before you buy the glass. In the SF area you will probably have better luck than I did locally.

    For reference, these are the folks I ordered from. They had the patterns for my car, nice folks and the glass fit like OEM. However, that was about two years ago.

    And also - WELCOME!!



    Leave a comment:

  • rockne10
    From the "Home" page, click on "Valuable Links", scroll to Vendors.

    Leave a comment:

  • warrlaw1
    I bought a kit from S.I. for the rubbers and channel felt (cat whiskers?) and clips, etc. Everything seems to be going in as planned.

    Leave a comment:

  • Tom Bredehoft
    Any reputable auto glass shop can and will make new windows (flat glass)

    The channels are available through many of our vendors, see home page "Vendors"

    Tom Bredehoft
    '53 Commander Coupe (since 1959)
    '55 President (6H Y6) State Sedan
    ....On the road, again....
    '05 Legacy Ltd Wagon
    All Indiana built cars

    Leave a comment:

  • scottdancer
    started a topic 53 coupe door glass and channels

    53 coupe door glass and channels

    I am back to a long time project car, my 1953 coupe. The wing windows are cracked and bubbled. The channel material could use fresenhed up. Can someone point me to a source for window stuff? The regulators seem ok after clean and lube. I am in the SF Bay area. Thanks Scott