Announcement

Collapse

Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage: www.studebakerdriversclub.com/tips.asp
See more
See less

Tighe roller cam question...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Tighe roller cam question...

    Been trying to get some questions answered from Tighe Cams...(Australia).

    See the posts titled..."Tighe Cams in Australia"

    http://www.tighecams.com.au/semiFinished.htm

    See the e-mails I sent them. We did get a short way into some possible help, then...no more e-mails back with more answers.

    Any chance you could give them a call and try to get some pertinant information on getting a few cam blanks going?

    Thanks

    Mike

  • #2
    If that fails .. I "kinda" have a contact in Australia.

    Might edit your topic .. looks like you meant Austria.

    Tom
    '63 Avanti R1, '03 Mustang Cobra 13" front disc/98 GT rear brakes, 03 Cobra 17" wheels, GM alt, 97 Z28 leather seats, TKO 5-spd, Ported heads w/SST full flow valves.
    Check out my disc brake adapters to install 1994-2004 Mustang disc brakes on your Studebaker!!
    http://forum.studebakerdriversclub.c...bracket-update
    I have also written many TECH how to articles, do a search for my Forum name to find them

    Comment


    • #3
      G'day Mike,
      I will ring them today and let you know the outcome

      Regards Bob
      Regards Bob

      Comment


      • #4
        tee hee hee .. them Aussies .. they always say "g'day".[)]

        Tom
        '63 Avanti R1, '03 Mustang Cobra 13" front disc/98 GT rear brakes, 03 Cobra 17" wheels, GM alt, 97 Z28 leather seats, TKO 5-spd, Ported heads w/SST full flow valves.
        Check out my disc brake adapters to install 1994-2004 Mustang disc brakes on your Studebaker!!
        http://forum.studebakerdriversclub.c...bracket-update
        I have also written many TECH how to articles, do a search for my Forum name to find them

        Comment


        • #5
          G'day all,
          all the details for the cams are here
          http://racingstudebakers.com/stl-web...opic.php?t=600
          I will let it run for a few weeks and see what #s we get and go from there.



          Regards Bob
          Regards Bob

          Comment


          • #6
            If you are interested...as Bob says...go to -

            http://racingstudebakers.com/stl-web...opic.php?t=600

            For the latest info on the Tighe roller cams

            Mike

            Comment

            Working...
            X