Replacing fuel lines

[Invalid User Name]

I am replacing all the fuel ines on my 1950 Champion while it is laid up. Since this is the first time I have ever done it I have to ask - do you put any sealer on the threads? It doesn't look like there was anything on them, but the car is old so maybe there was. I want to do this right.


Doug
Venice, Florida
1950 Champion
9G F1

[Tom Bredehoft]

No sealer, flair fittings hold the seal. If you want to lubricate the threads, use Teflon paste.

[img=left]http://www.alink.com/personal/tbredehoft/Avatar1.jpg[/img=left]
Tom Bredehoft
'53 Commander Coupe (since 1959)
'55 President (6H Y6) State Sedan
....On the road, again....
'05 Legacy Ltd Wagon
All Indiana built cars

[Invalid User Name]

Thanks Tom. That's what I needed to know.


Doug
Venice, Florida
1950 Champion
9G F1