Announcement

Collapse

Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage: www.studebakerdriversclub.com/tips.asp
See more
See less

sn92 paxton has a serpentine belt dr on it can

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • sn92 paxton has a serpentine belt dr on it can

    SN92 SUPERCHARGER HAS A SERPENTINE DR PULLY ON IT CAN I PUT A V DR PULLY ON IT THANK HURRICANE OR CAN I PUT A SERPENTINE CRANK PULLY ON IT 259 CU MOTOR IN A 55 PREZ COUPE THANK FOR ALL THE INFO YOU CAN GIVE HURRICANE

  • #2
    The pulley shaft on the supercharger is the same. When I put a SN93 on a top mount the people at Paxton said that the stock pulley would sit out to far for the bearings to handle, so I repositioned the idler arm and crank pulley inward slightly, I don't remember what the distance was. I then put an Avanti side mount setup on my car and the stock Avanti supercharger pulley is straight bolt up.
    David

    Comment

    Working...
    X