Info for those with Edelbrock AFB's

[Laemmle]

Those members who have replaced their AFB's and installed new shiny E carbs........a bit of info.

If you want to utilize the larger throttle attachment hole on the linkage (1/2 in) you will have to bush the hole........Jegs has the perfect product......P/N 15220 "Steel Carb Linkage Bushing"

Those wishing an AN alternative to steel are in luck as well:
P/N 15219.......Aluminium carb Linkage Bushing Kit.

Thanks to Ernie Rizzo for the suggestion of utilizing the larger hole for the throttle rod.

[N8N]

good stuff. this is important for those with automatics, because that is the hole that makes the throttle pressure linkage work correctly. I think I fudged mine with some thin stainless washers.

nate

--
55 Commander Starlight
http://members.cox.net/njnagel