Announcement

Collapse
No announcement yet.

Removing tachometer sending unit

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Removing tachometer sending unit

    I'm currently trying to remove the tachometer sending unit from my 63' Avanti. The directions are vague stating only to remove it and its location. I've spend a considerable amount of time trying to figure out how it's mounted with no luck. I've searched the forums in hopes to find a way to remove the unit without removing the dash, still with no luck. Any advice would be much appreciated.

    Thanks
    Shaun

  • #2

    The sender is over the drivers right knee...

    Take a look at this and you'll see how it's fastened....




    Bob Johnstone
    www.studebaker-info.org

    64 GT Hawk
    55 President State Sedan
    70 Avanti (R3)
    64 GT Hawk (K7)
    1970 Avanti (R3)

    Comment


    • #3
      If I had to do that in my car, I would start by removing the drivers seat and putting some comfortable pillows in its place.

      ========================
      63 Avanti R2, 4-Speed, 3.73 TT
      Martinez, CA

      Comment


      • #4
        I removed the tach head in order to gain access to the sending unit in my 63 Avanti. It's still A PITA to remove the sending unit, but you can do most of the work through the hole in the instrument panel. Bud

        Comment

        Working...
        X