Announcement

Collapse

Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage: www.studebakerdriversclub.com/tips.asp
See more
See less

Underhood Detailing

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Underhood Detailing

    I'm still working on the detailing on my 1963 R2 GT Hawk.
    I have a question about the throttle bell crank (the large part of
    the throttle linkage that is fastened to the engine with a head bolt).
    Should this part be zinc plated or painted? If painted, what color?
    Will I mess things up by removing a head bolt or can I just
    retorque it when I reinstall the bell crank?
    I really appreciate all the help that you members of this forum
    have provided. Thanks again!!!

  • #2
    You can just paint it with Eastwood Detail gray and no need to do anything but retorque the bolt when you are done.


    JDP
    Arnold Md.
    Studebaker On The Net
    http://stude.com
    My Ebay Items
    http://www.stude.com/EBAY/

    64 GT hawk
    64 Commander 2 dr.
    63 R2 4 speed GT Hawk (Black) #2
    63 Avanti R1
    63 Daytona convert
    63 Lark 2 door
    63 Lark 2 door #2
    62 Daytona HT/ 4 speed
    62 Lark 2 door
    60 Hawk
    59 3E truck
    52 Starliner
    51 Commander

    JDP Maryland

    Comment

    Working...
    X