Announcement

Collapse

Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage: www.studebakerdriversclub.com/tips.asp
See more
See less

1962 Hawk Clips

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 1962 Hawk Clips

    Does anyone know of any vendors that sell a "kit" of moulding and trim clips for a 62 Hawk. My body man is getting ready to finish the car and we need all new clips for the moulding that goes along the rocker panel, wheel wells and the trim that goes along the top of the front and rear fenders. Perhaps someone knows the part number for this kind of item. SASCO may have it, but I need the part number. Studebaker Int'l shows some individual clips in their catalog, but don't know where these clips go... rocker panel is different than fenter.

    Any help?


    Laisez le bon temps roulez avec un Studebaker
    Laisez le bon temps roulez avec un Studebaker

  • #2
    I'm sure the rocker mouldings are just screwed on.The clips for the fender top trim is #1343976 and SI has them for $1.50 each

    Comment


    • #3
      SI has most of them, you'll the wheel well molding clips too, $2.95 each. Top of the fender is 3 part numbers.


      JDP
      Arnold Md.
      Studebaker On The Net
      http://stude.com
      My Ebay Items
      http://www.stude.com/EBAY/

      64 GT hawk
      64 Commander 2 dr.
      63 R2 4 speed GT Hawk (Black) #2
      63 Avanti R1
      63 Daytona convert
      63 Lark 2 door
      63 Lark 2 door #2
      62 Daytona HT/ 4 speed
      62 Lark 2 door
      60 Hawk
      59 3E truck
      52 Starliner
      51 Commander

      JDP Maryland

      Comment

      Working...
      X