Announcement

Collapse
No announcement yet.

chassis replacement

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • chassis replacement

    http://www.tuerca.cl/studebakerchile/

  • #2
    Not a Lark chassis. Whats wrong with the one you have? Early Larks had a 108.5 wheelbase increased to 109 in 62 on 2 door models (frame was the same, different location of the rear axle on the leaf springs) & 113" wheel base on 4 doors & wagons. The wheelbase on the 58 was 116.5" while the Hawk carried 120.5"

    Worst case solution would be to splice the front or rear section from a Lark frame to yours. Possible but without a jig setup to ensure keeping the datum line set, very difficult.

    60 Lark convertible
    61 Champ
    62 Daytona convertible
    63 G.T. R-2,4 speed
    63 Avanti (2)
    66 Daytona Sport Sedan
    59 Lark wagon, now V-8, H.D. auto!
    60 Lark convertible V-8 auto
    61 Champ 1/2 ton 4 speed
    62 Champ 3/4 ton 5 speed o/drive
    62 Champ 3/4 ton auto
    62 Daytona convertible V-8 4 speed & 62 Cruiser, auto.
    63 G.T. Hawk R-2,4 speed
    63 Avanti (2) R-1 auto
    64 Zip Van
    66 Daytona Sport Sedan(327)V-8 4 speed
    66 Cruiser V-8 auto

    Comment


    • #3
      Ricardo, I like your website. You have some great photos.

      Larry Y
      North Wales, PA
      Larry Y
      North Wales, PA

      Comment


      • #4
        Thanks Warren for the data. The car is from a friend. The chassis seems to be more rusted than normal because the car has been sitting long years in a yard. Probably the best way is to [u]add</u> new rails to the chassis

        Thanks Larry for visit my site. Nice to know that you liked it.

        Studebakerchile
        http://www.tuerca.cl/studebakerchile/

        Comment

        Working...
        X