Announcement

Collapse
No announcement yet.

Glue Removel Under The Roof

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • dean pearson
    replied
    I used a putty knife and then a wire cup brush on mine. Oh yeah, definitly a dust mask and safety glasses.
    SAFETY FIRST. Then Primer.
    Dean pearson.

    Leave a comment:


  • rockne10
    replied
    That original glue should be pretty dry. I sand it off with 80 grit on a DA. Paint the roof and install better modern insulation.

    Leave a comment:


  • Chris Pile
    replied
    Personally, I'd remove it to get a clean surface to reglue.

    Chris Pile
    Editor: The Studebaker Special
    http://midwaystudebakers.tripod.com/

    Leave a comment:


  • Carl Purdy
    started a topic Glue Removel Under The Roof

    Glue Removel Under The Roof

    I have all the insulation off under the roof. But the glue is still there. Should I try to take it all off or try to seal it. I would hate to ruin a good headliner.


    7G-Q1 49 2R12 10G-F5 56B-D4 56B-F2
Working...
X