Announcement

Collapse
No announcement yet.

aluminum heads

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    Then all you'd need is for somebody like Donovan or Merlin to make a studebaker block with a larger bore...out of aluminum, of course. Better do that BEFORE the heads since the larger bore could accommodate bigger valves. Let's just drag out the DOHC stude motor and send it to Japan and let the busy little guys in the land of the rising sun copy it and release it into the american market; like they do everything else...On the subject of a different intake , like a 360 mopar, absolutely. Those stude ports look normal until you realize that they're cut at an angle, and if they were straight cut, their tiny size would be obvious.

    Comment

    Working...
    X