Announcement

Collapse
No announcement yet.

brake lights/electronics

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • rockne10
    replied
    Yes.

    Leave a comment:


  • 14x7
    replied
    would the same apply for 55 president coupe?

    Leave a comment:


  • rockne10
    replied
    Depending on the nature of the problem it should be noted, the brake lights are wired through the turn signal switch. Often, the problem is there.

    Leave a comment:


  • Skip Lackie
    replied
    Adddendum in case you didn't know: the brake light switch is activated by hydraulic pressure, and is therefore plugged into the brake line. Unlike today's cars, it is not activated by the brake pedal.

    Skip Lackie
    Washington DC

    Leave a comment:


  • 64V-K7
    replied
    Look down over the drivers side inner fender. There should be a brass distributor bolted to the frame, where the system splits to the front and rear wheels. OR
    Look under the drivers side floor pan where the Master Cylinder is located. Follow the output line.... You'll find it


    Bob Johnstone
    www.studebaker-info.org

    64 GT Hawk
    55 President State Sedan
    70 Avanti (R3)

    Leave a comment:


  • rodney craig
    started a topic brake lights/electronics

    brake lights/electronics

    I am restoring a 1960 lark and i am having trouble with brake light operation. Where is the brake light switch or sending unit.
Working...
X