Announcement

Collapse
No announcement yet.

wiring diagram

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Tom Bredehoft
    replied
    Think about it, Joe. If the car has turn signals, there are five wires coming from the dashboard. If not only three.

    Remove all nuts and put one wire from the dashboard on each screw

    Each headlight needs two, (from each fender) parking lights need one (each fender) and each turns signal needs one.

    Turn the lights on parking, see what wire lights them up. Put them both on the same screw and secure the nut.

    Turn the lights off, turn on the key and one turn signal, check it out, ditto the other one. That leaves two terminals for the high and low headlights.

    [img=left]http://www.alink.com/personal/tbredehoft/Avatar1.jpg[/img=left]
    Tom Bredehoft
    '53 Commander Coupe (since 1959)
    '55 President (6H Y6) State Sedan
    (Under Construction 617 hrs.)
    '05 Legacy Ltd Wagon
    All Indiana built cars

    Leave a comment:


  • Kdancy
    replied
    Chuck's site --

    https://www.studebakerparts.com/stud...ediagrams.html

    Leave a comment:


  • jmccarrol@hotmail.com
    started a topic wiring diagram

    wiring diagram

    Some wires are off the junction block that sits on the shroud in front of the rad in my 52 Champion. Can someone provide me with the proper wiring diagram for this. Thank you.
Working...
X