Announcement

Collapse

Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage: www.studebakerdriversclub.com/tips.asp
See more
See less

GT Hawk steering column seal

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • GT Hawk steering column seal

    I'm still working on the engine compartment of my 1963 R2 Hawk
    and I have a question about what goes in the large oval hole on
    the engine side of the firewall. My car had a very brittle
    piece of material similar to the inner fender splash apron with
    a thin layer of fiberglass between it and the backside of the
    rubber column seal. I haven't seen this in any catalogs, but I
    suppose I could make it, if that is what is supposed to be there.
    Thanks for your assistance. I really appreciate it!

  • #2
    R2,
    What you're lookin' for is on page 175 of the Studebaker International parts catalog. If you don't have this catalog you can go to the SDC web page and look under vendors. You can call or E-mail them for a catalog. It is part # 1320181X1 Steering Column Seal and is installed from inside the car, price $55.00 Hope this helps and welcome to the forum.

    Dan Miller
    Atlanta, GA.

    [img=left]http://static.flickr.com/57/228744729_7aff5f0118_m.jpg[/img=left]
    Road Racers turn left AND right.

    Comment


    • #3
      Here's what Dan refers to. Page down to 175...

      http://www.studebaker-intl.com/Resources/Part%2010.pdf




      Dick Steinkamp
      Bellingham, WA
      Dick Steinkamp
      Bellingham, WA

      Comment


      • #4
        Thanks Dick, Happy Hollidays

        Dan

        [img=left]http://static.flickr.com/57/228744729_7aff5f0118_m.jpg[/img=left]
        Road Racers turn left AND right.

        Comment

        Working...
        X