Announcement

Collapse
No announcement yet.

Fender spear replacement

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • studecruiser
    replied
    Sounds like a job for the wife - yep, I'm a dead man!!

    Leave a comment:


  • JDP
    replied
    quote:Originally posted by studecruiser

    I have new plastic spears to install on the wife's 63 GT Hawk. I can only find one bolt under the fender in the wheel well area that seems to hold the moulding down. Are there any other bolts that cannot be seen that have to be removed in order to replace the spear?
    I just love having more than one Stude - anyways an adventure.

    The front nut is a bit hard to get to, and often buried in undercoating.

    JDP/Maryland

    Leave a comment:


  • Chucks Stude
    replied
    You have to reach up and kinda over the headlight bucket to find the front one. As you get older, it gets harder to reach !!!!!

    Leave a comment:


  • jimmijim8
    replied
    Two studs and two nuts per spear. Maybe both a stud and nut are missing. Very replaceable. jimmijim

    Leave a comment:


  • studecruiser
    started a topic Fender spear replacement

    Fender spear replacement

    I have new plastic spears to install on the wife's 63 GT Hawk. I can only find one bolt under the fender in the wheel well area that seems to hold the moulding down. Are there any other bolts that cannot be seen that have to be removed in order to replace the spear?
    I just love having more than one Stude - anyways an adventure.

Working...
X