Announcement

Collapse

Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage: www.studebakerdriversclub.com/tips.asp
See more
See less

WCFB CARB REBUILD

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • WCFB CARB REBUILD

    Who is rebuilding WCFB carbs these days?

  • #2
    Dave Thibeault does good work. 978 897-3158
    Frank van Doorn
    Omaha, Ne.
    1962 GT Hawk 289 4 speed
    1941 Champion streetrod, R-2 Powered, GM 200-4R trans.
    1952 V-8 232 Commander State "Starliner" hardtop OD

    Comment


    • #3
      I had "studesnbldr" rebuild one for me last year. Christof did a great job and it ran great right out of the box!

      http://forum.studebakerdriversclub.c...display&id=792



      Carey
      Packard Hawk

      Carey
      Packard Hawk

      Comment


      • #4
        I'm sure T-bow isn't the only best one out there but I swear by him.
        "All attempts to 'rise above the issue' are simply an excuse to avoid it profitably." --Dick Gregory

        Brad Johnson, SDC since 1975, ASC since 1990
        Pine Grove Mills, Pa.
        sigpic'33 Rockne 10, '51 Commander Starlight, '53 Commander Starlight "Désirée"

        Comment


        • #5
          Rick -

          Unless the throttle shafts need bushings...they are a very simple carburetor. You should be able to manage it yourself with a good read of the instructions in the parts kit.

          Otherwise, any GOOD carb. shop should be able to handle it.
          If the shafts are loose...go online and find a carburetor "race shop". See if one of them is interested. They'll have much better luck with doing the bushings correctly than your average "rebuilder".

          Mike

          Comment

          Working...
          X