No announcement yet.

PS control valve

  • Filter
  • Time
  • Show
Clear All
new posts

  • PS control valve

    I have a 85 Avanti which is the last year of the Studebaker frame. The control valve hasn't been installed for several years (don't ask why). What I needis several pictures of how the control valve hose routing is supposed to be. Anybody out there have some digital pics of that area? Thanks Bob Fouts

  • #2
    Bob, up at the top of this page you will find the 'search' button. Click it and type in power steering control valve. This will give you a list of all the topics where that has been discussed, many with pictures. You should be able to find what you need.

    Tim K.
    '64 R2 GT Hawk
    Tim K.
    \'64 R2 GT Hawk


    • #3
      Bob, I'm not much for saying, 'see the seach feature', but in this case it's worthwhile. There should be an article on rebuildint the entire power steering system, including hose replacement. This was done on an Avanti. Good luck!

      Tom - Mulberry, FL

      1964 Studebaker Daytona - 289 4V, 4-Speed (Cost To Date: $2125.60)

      Tom - Bradenton, FL

      1964 Studebaker Daytona - 289 4V, 4-Speed (Cost To Date: $2514.10)
      1964 Studebaker Commander - 170 1V, 3-Speed w/OD