Announcement

Collapse
No announcement yet.

Road Draft Tube ?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Allan Songer
    replied

    Do yourself and the environment a favor and install a PCV valve!
    Unless, of course this is 380+ point show car . . .

    Leave a comment:


  • skyway
    replied
    Ditto the copper scrubbing pad. Buy one pad and have enough goods for several cars.

    Leave a comment:


  • Studeman
    replied
    quote:Originally posted by new cruiser

    I used a piece of copper scrubbing pad...very coarse and open and it wont rust.
    This guy knows what he's talking about... I do the same..
    I also put the cotter pin THROUGH the copper mesh- not just under it. It takes a bit of wiggling... but you can get it in there.




    Ray


    Specializing in Studebaker Restoration

    Leave a comment:


  • new cruiser
    replied
    I used a piece of copper scrubbing pad...very coarse and open and it wont rust.

    Leave a comment:


  • BobPalma
    replied
    Buy the coarsest steel wool you can. Then pull it apart to expand it as much as possible and use a wad of the expanded (i.e., most open) material. The material is really there only to keep bugs and such from wandering up the tube into the valley cover. BP

    Leave a comment:


  • CHAMP
    started a topic Road Draft Tube ?

    Road Draft Tube ?

    I did a search and came up with nothing! I know I have seen this info here before. Anyway what steel wool do use in the road draft tube? I have coarse steel wool and it looks like it might be to restrictive? Thanks
Working...
X