Announcement

Collapse
No announcement yet.

Bendix Valve Body for P/S

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Carl Purdy
    replied
    THANKS A LOT. THAT WILL HELP.


    7G-Q1 49 2R12 10G-F5 56B-D4 56B-F2

    Leave a comment:


  • Studeman
    replied
    I can't believe no one posted a pic to this thread...This should be big enough to print (landscape). Personally- I think this is a stupid drawing. it's hard to tell where the locknut (1308-120) goes. It certainly isn't where it's drawn! It and the washer should be drawn between 1308-123 and 1308-127.
    To adjust the spring- tighten the locknut (1/2" wrench) all the way till it stops... back off 1/4 Turn (1 1/2 flats)



    Ray


    Specializing in Studebaker Restoration

    Leave a comment:


  • Carl Purdy
    started a topic Bendix Valve Body for P/S

    Bendix Valve Body for P/S

    Does anybody have a break down drawing for a Bendix Valve body. And adjustments on the spring. My memory is really giving me fits. To stubborn to quit messing with cars. Any help would be appreciated.


    7G-Q1 49 2R12 10G-F5 56B-D4 56B-F2
Working...
X