Announcement

Collapse
No announcement yet.

pertronix installation

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • showbizkid
    replied
    Right on, Rich! Thanks for the pointer!


    [img=left]http://members.cox.net/clarknovak/lark.gif[/img=left]

    Clark in San Diego
    '63 F2/Lark Standard
    http://studeblogger.blogspot.com
    www.studebakersandiego.com

    Leave a comment:


  • StudeRich
    replied
    Here is the post you want for that info Clark:
    http://forum.studebakerdriversclub.c...TOPIC_ID=27878

    You only needed to look three posts above yours, on this topic! Lol!


    StudeRich at Studebakers Northwest -Ferndale,WA

    Leave a comment:


  • showbizkid
    replied
    quote:Originally posted by 52 Ragtop

    Depending on where to live, you might think about sending you dist. to Bud in the LA area. he has a Sun Dist. machine and KNOWS how to use it.

    Jim
    Who's Bud? I've got a couple of dists that could use clocking.


    [img=left]http://members.cox.net/clarknovak/lark.gif[/img=left]

    Clark in San Diego
    '63 F2/Lark Standard
    http://studeblogger.blogspot.com
    www.studebakersandiego.com

    Leave a comment:


  • 52 Ragtop
    replied
    Depending on where to live, you might think about sending you dist. to Bud in the LA area. he has a Sun Dist. machine and KNOWS how to use it.

    Jim

    Leave a comment:


  • jpiatchek
    replied
    Thanks for the info on the distributor and the Pertronix setup. I will attemp this weekend. John

    Leave a comment:


  • Bud
    replied
    The distributor should come out of the block with no problems. You'll have to wiggle it around a bit though because of the long oil pump drive shaft. Bud

    Leave a comment:


  • StudeRich
    replied
    It will be tight with the Delco Window Dist. but with the Cap and Rotor removed it WILL come out. If not, you need to check the Front and Rear Engine Mounts if they are shot or loose the engine could have slipped back.


    StudeRich at Studebakers Northwest -Ferndale,WA

    Leave a comment:


  • Bordeaux Daytona
    replied
    I don't think so, I put a delco window in my 64 daytona and I got it in there without taking anything else off.

    Leave a comment:


  • jpiatchek
    started a topic pertronix installation

    pertronix installation

    I have a 64 Daytona convertible with a 289 in it. I have just purchased a pertronix kit for the distributor. Will I have problem with clearance on the wiper motor when trying to remove the distributor? It looks like the motor could be in the way and that I may have to move it? I have the Delco window distribotor What say you? Thanks John
Working...
X