Announcement

Collapse
No announcement yet.

oil line restricter opening

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • buddymander
    replied
    Hey Leon did you ever adjust your sway bar properly?

    Leave a comment:


  • BobPalma
    replied
    Page 23, February 2009 Turning Wheels! BP

    Leave a comment:


  • StudeRich
    replied
    This post is one of many found with the Search Function.

    http://forum.studebakerdriversclub.c...hTerms=oriface,

    Here Gary Ash mentions a .045 to .060 restrictor fitting.

    Leave a comment:


  • Leon
    started a topic oil line restricter opening

    oil line restricter opening

    I've rebuilt a 289 from a 62 Hawk and am installing into a 62 truck. The oil filter sits on top of the engine, off the oil filler tube. On the inlet to the oil filter there should be a fitting with a certain size hole to restrict, somewhat, the amount of oil entering the filter. Does anybody know what size that hole should be? Or even better, what size drill bit to use? thanks- Leon
Working...
X