Stude Cam

[52-fan]

I tried it again tonight and came up with 1.344 to the top of the lobe, but .86 for the other measurement. Does this make sense? I measured two lobes more than once.


1952 Champion Starlight, 1962 Daytona, both w/overdrive.Searcy,Arkansas
"I may be lazy, but I'm not shiftless."

[Alan]

You have a base circle radius of .430", which would give you .484" lift before the 1.5 rocker ratio is figured in. I would go back and check it again. If those measurements are right, you have got one nasty cam.

[52-fan]

The guy that sold it to me said it was hot. I figured at the time it was one of those experiments that failed and never planned to use it. I was checking to see if he was mistaken and hoped it was a stock cam.
I'm still not sure if I've got it right,but I measured several times. I may have to get someone else to check it.


1952 Champion Starlight, 1962 Daytona, both w/overdrive.Searcy,Arkansas
"I may be lazy, but I'm not shiftless."