rear main seal

[Guest]

i am about to put in a fresh rear main seal on a 289 anything i should know or look out for before i install it? and is there a toruqe lbs for the 4 bolts that hold the rockers down across the heads?


Thanks
Ryan

[StudeRich]

Are you looking for torque on the Head Bolts (65 Ft. Lbs.) that go through the Rocker Arm Stands, or the 4 small 5/16" stud/bolts in those stands for the Valve Covers?

All of the Torque Specs. are listed in Group I, under General Specifications in the Shop Manual.

You DO use a Shop Manual for working on your Studebaker right? [}] [B)]

[Guest]

i was talking about the 4 5/16 bolts.ive tried ordering one 3 different times and all three times they were on back order wheres the best place to get one?


Thanks
Ryan

[StudeRich]

They get 13-17 Lbs. I just snug them down with and end wrench.

I have the Parts Catalogs and Shop Manuals on CD Rom Disc. what year do you need? You can email me from here if you click on my "handle".

quote:Originally posted by Ryan1253

i was talking about the 4 5/16 bolts.ive tried ordering one 3 different times and all three times they were on back order wheres the best place to get one?
Thanks

StudeRich at Studebakers Northwest -Ferndale,WA