Announcement

Collapse
No announcement yet.

Front seat belt install on 47-52 Champion?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Captain Billy
    replied
    Yes, the floor holes were used when I had lap belts, this just gets the winder out of the way.






    Bill Foy
    Kingston, Ontario
    1964 Wagonaire Slider

    Leave a comment:


  • Lothar
    replied
    Thanks Billy. Your Wagonaire should have seat belt anchor points installed from the factory. Did you use them?

    1950 Champion 4 Dr.
    Holdrege NE

    Leave a comment:


  • Captain Billy
    replied
    This is what they look like in my 64.





    Bill Foy
    Kingston, Ontario
    1964 Wagonaire Slider

    Leave a comment:


  • BobGlasscock
    replied
    Thanks for the thread Lothar. This is on my list also.

    '50 Champion, 1 family owner

    Leave a comment:


  • Lothar
    started a topic Front seat belt install on 47-52 Champion?

    Front seat belt install on 47-52 Champion?

    Recent threads about seat belts have focused my mind on the topic. I want to use rewinding lap belts for the front seat of my 1950 Champion sedan with stock bench seat. As far as I can tell, the only place to put the rewinder is directly behind the rear corner of the seat. The standard after-market rewinders that I've seen advertised on the internet don't look like they will fit well. I hope to find belts with a tilted rewinder and a long plastic sleeve to hold the buckle within reach. Has anyone found a rewinder configuration that works well on these seats? Could any 47-52 owners who have the rewinding belts installed post a couple pictures?
    Thanks in advance.

    1950 Champion 4 Dr.
    Holdrege NE
Working...
X