Announcement

Collapse
No announcement yet.

marraige ring 65-66 axle bearing -SOLVED-

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 59r2
    replied
    Thanks Guys,
    I just got off the phone with a company called
    ,Locate Ball Bearing, 800 409 3632, They asked how many I needed ,Took my card number and said they are on the way. 14.00 each
    plus s/h . I got my fingers crossed on this one.
    JOE


    1959 HARDTOP R2 4speed
    1960 conv R2 auto
    SDC member since 1972

    Leave a comment:


  • Rosstude
    replied
    I found some for our 66 Wagonaire a few years ago here,
    Border Parts, 619-461-0075. Spring Valley (San Deigo)Ca. I spoke with John.
    They also had the 27 spline spider gears. I came to them through a Jeep / 4X4 shop.

    [img=left]http://i52.photobucket.com/albums/g27/Rosstude/OldWorld2005002.jpg[/img=left]
    Ross.
    Riverside, Ca.
    1957 Provincial X2
    1958 Transtar

    Leave a comment:


  • leyrret
    replied
    I too was unable to locate any except from Stephen Allen at the time. I cut the bearing
    to remove it and drove ring off to save it. They can be used over as long as it takes
    a bit to push it back on. The complete assembled axle is available from Sasco.(or was)

    Leave a comment:


  • Doug M
    replied
    I needed one for my 66 the bearing shop here checked with timken and said not avalible so I changed the rear end. Doug M

    Leave a comment:


  • 1962larksedan
    replied
    quote:Originally posted by leyrret

    Stephen Allen had some of those when he was in business. Who ever got his stock probably
    has them. Someone here probably knows where it went?
    The Studebaker part # should be 1562427

    http://www.studebakerswest.net/main....6.qscstrfrnt03

    They bought Steve Allen's stuff

    -------------------------------------------------------------------------
    Borrowed Bams50's sigline here:

    "Do they all not, by mere virtue of having survived as relics of a bygone era, amass a level of respect perhaps not accorded to them when they were new?"

    Leave a comment:


  • leyrret
    replied
    Stephen Allen had some of those when he was in business. Who ever got his stock probably
    has them. Someone here probably knows where it went?
    The Studebaker part # should be 1562427

    Leave a comment:


  • r1lark
    replied
    quote:Originally posted by 59r2
    Joe,

    Most any bearing supply house should be able to order these for you. I know that doesn't help you today tho.....

    Paul
    Winston-Salem, NC
    Visit The NEW Studebaker Skytop Registry website at: www.studebakerskytop.com

    Leave a comment:


  • 59r2
    started a topic marraige ring 65-66 axle bearing -SOLVED-

    marraige ring 65-66 axle bearing -SOLVED-

Working...
X