Announcement

Collapse
No announcement yet.

Model symbol and body number plate location?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Jeffry Cassel
    replied
    If you remove them there is no paint at all underneath; it is either bare metal or rust. I always remove them and paint them separately .

    Leave a comment:


  • dave hethrington
    replied
    Originally posted by NCDave51 View Post
    Not easiest but most accurate to look up from the interior side of the firewall and punch back through the two OEM holes?
    Worked Thanks

    Leave a comment:


  • rockne10
    replied
    Originally posted by studegary View Post
    I will additionally add that the screws should also (as well as the plate) be painted the same color as the firewall.
    Yes; and they were attached before the tub was painted. If you remove them, there should be primer underneath.

    Leave a comment:


  • studegary
    replied
    I will additionally add that the screws should also (as well as the plate) be painted the same color as the firewall.

    Leave a comment:


  • dave hethrington
    replied
    Originally posted by NCDave51 View Post
    Not easiest but most accurate to look up from the interior side of the firewall and punch back through the two OEM holes?
    Good thinking. I will have to have a look. Thanks

    Leave a comment:


  • NCDave51
    replied
    Not easiest but most accurate to look up from the interior side of the firewall and punch back through the two OEM holes?

    Leave a comment:


  • dave hethrington
    replied
    Originally posted by rockne10 View Post
    Click image for larger version

Name:	PC071234.JPG
Views:	157
Size:	59.1 KB
ID:	1869053
    This is the plate. I must have filled the holes. From your picture it looks like it goes on the upper ledge close to the low spot by the hinge.

    Leave a comment:


  • rockne10
    replied
    Click image for larger version

Name:	PC071234.JPG
Views:	157
Size:	59.1 KB
ID:	1869053

    Leave a comment:


  • studegary
    replied
    Originally posted by NCDave51 View Post
    Look for two holes at the upper side of the passenger firewall, in the engine compartment.

    Two rather large Philips screws will affix it there.
    I agree and will add;
    1) it should be either 4H-C3 or 4H-C5,
    2) it should be painted the main body color (same as firewall).
    Last edited by studegary; 12-07-2020, 06:39 PM. Reason: missing d

    Leave a comment:


  • NCDave51
    replied
    Look for two holes at the upper side of the passenger firewall, in the engine compartment.

    Two rather large Philips screws will affix it there.

    Leave a comment:


  • rbisacca
    replied
    Originally posted by dave hethrington View Post
    Can anyone tell me where this plate goes. Found it in my toolbox but can't remember where it was. 53 commander coupe. Didn't see it on google but think it goes on the firewall somewhere
    I'm sure someone could provide you with an answer if you'd post a picture.

    Leave a comment:


  • Model symbol and body number plate location?

    Can anyone tell me where this plate goes. Found it in my toolbox but can't remember where it was. 53 commander coupe. Didn't see it on google but think it goes on the firewall somewhere
Working...
X