Announcement

Collapse
No announcement yet.

1964 Daytona Inner Fender rubber

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • StudeRich
    replied
    Remember to Check your Fender to Door Gap, it may take more than one or a thicker Rubber "Shim" to get the Correct Fender to Door clearance.

    Leave a comment:


  • steve.maclean2009
    replied
    Thanks StudeRich. Yeah I have the rubbers that are held on with the staples and the top ones between the fender and cowel.

    Thanks for the prompt response.

    Leave a comment:


  • StudeRich
    replied
    No, there are No Rubber Shims between the Inner Fender and Cowl, only on the Outer Fenders.

    There IS a rubber Water/Mud shield in the corners between the Inner Fenders and the Firewall/Hood Hinge and also at the bottom of the Inner Fender next to the Steering Gear and the same place on the Right.

    Leave a comment:


  • rusty65
    replied
    @Steve,PM sent.

    Leave a comment:


  • 1964 Daytona Inner Fender rubber

    We are installing new fenders and aprons on our 64 Daytona. Is there an anti squeak rubber that sits between the inneeapron and body? I know there are rubber spacers between the outer fender and body but I don't see in the parts manual anything for the inner. My dad is sure there was rubber there when we disassembled 15 years ago. Any thoughts?

    Steve
Working...
X