Announcement

Collapse
No announcement yet.

1964 Daytona Inner Fender rubber

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Body / Glass: 1964 Daytona Inner Fender rubber

    We are installing new fenders and aprons on our 64 Daytona. Is there an anti squeak rubber that sits between the inneeapron and body? I know there are rubber spacers between the outer fender and body but I don't see in the parts manual anything for the inner. My dad is sure there was rubber there when we disassembled 15 years ago. Any thoughts?

    Steve

  • #2
    @Steve,PM sent.

    Comment


    • #3
      No, there are No Rubber Shims between the Inner Fender and Cowl, only on the Outer Fenders.

      There IS a rubber Water/Mud shield in the corners between the Inner Fenders and the Firewall/Hood Hinge and also at the bottom of the Inner Fender next to the Steering Gear and the same place on the Right.
      StudeRich
      Second Generation Stude Driver,
      Proud '54 Starliner Owner

      Comment


      • #4
        Thanks StudeRich. Yeah I have the rubbers that are held on with the staples and the top ones between the fender and cowel.

        Thanks for the prompt response.

        Comment


        • #5
          Remember to Check your Fender to Door Gap, it may take more than one or a thicker Rubber "Shim" to get the Correct Fender to Door clearance.
          StudeRich
          Second Generation Stude Driver,
          Proud '54 Starliner Owner

          Comment

          Working...
          X