Announcement

Collapse
No announcement yet.

3M trim material for fin seam

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 3M trim material for fin seam

    I'm going to go the Ray Fitcthorn method of fin replacement- does anyone(Ray are you reading this?) know what the part # is?

    Gallivan
    57 Golden Hawk
    Golden, CO
    Gallivan
    57 Golden Hawk
    Golden, CO

  • #2
    It is made by a company called "PRO-STRIPE" and the part number is M829905. It is made in Canada, but available all over the US. It comes in a 100' roll- so you will have alot left over. It can be scuffed and painted- but I have seen a few that were left chrome.

    http://www.msitrt.com/protecto_chart.htm

    I gave my last bit to BondoBilly.... he may have some left. I haven't re-ordered, and don't plan to unless I have a Hawk resto in house..

    Ray


    Specializing in Studebaker Restoration
    Ray

    www.raylinrestoration.com
    Specializing in Studebaker Restoration

    Comment


    • #3
      Protekto Trim [Cowles Products] part #37-530.. 20 foot kit,about $23.00
      Mine also has the same number as Rays,in a box below the part number
      Must be the same manufacturer.

      Oglesby,Il.
      Anybody that drives faster than me is a maniac.Anybody that drives slower than me is an idiot.
      Oglesby,Il.

      Comment

      Working...
      X