Announcement

Collapse
No announcement yet.

Brakes auto adjust

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ross
    replied
    The majority of dual master cylinder refits I have seen are a fools paradise. Not being properly engineered, they do not have sufficient stroke to provide the promised safety. Open any one bleeder screw and they go the floor. You will achieve far greater safety by replacing every inch of your brake tubing and of course the hoses. Old tubing may look good from the outside but it can pit on the inside just as the wheel cylinders do.

    Leave a comment:


  • Skip Lackie
    replied
    A dual master cylinder will prevent the total lost of braking if one of your brake lines fails. But you would need to make up a couple of relatively short brake lines running from the new m/c to the now-separated front and rear brake lines. Not difficult, but there may not be a readily available kit with made-up lines for your car. Suggest contact Jim Turner and see what he recommends.

    Leave a comment:


  • Merwin
    replied
    Well, I appreciate your input. Good points. I am rethinking the plan now. Will be refurbishing for sure but seems manual adjustment works fine.
    A related subject, it has been suggested to me that I might install a dual chamber master cylinder. What are your thoughts?
    thanks
    Merwin

    Leave a comment:


  • Studebakercenteroforegon
    replied
    Originally posted by Jeffry Cassel View Post
    Self adjusting brakes are prone to malfunction. I don't think calling them a "nice upgrade" is fair. Agree with Hallabutt. KISS
    I would personally say that the ‘63 and later self adjusting drum brakes are NOT prone to malfunction. Very easy to understand and work on. I have had many ‘63 and later cars and they worked just fine. You do have to change the backing plate since the upper link hooks to a extended pin. Although I would agree that given the limited driving we do with our Studebakers that it is not worth the effort. Also, the self adjusting system was designed to provide a medium pedal height, and I always like to adjust my drums to a fairly high pedal.

    Leave a comment:


  • Jeffry Cassel
    replied
    Self adjusting brakes are prone to malfunction. I don't think calling them a "nice upgrade" is fair. Agree with Hallabutt. KISS

    Leave a comment:


  • Skip Lackie
    replied
    Am not aware of any kits to retrofit self adjusters. The 59-64 chassis parts book lists and shows all the parts that are unique to the 63-later self-adjusting brakes.

    Leave a comment:


  • Merwin
    replied
    I'm totally restoring them anyway, probably will require new drums, wheel cylinders for sure, rest of the parts are pretty rusted. So if totally going through them anyway, thought auto adjust would be a nice upgrade.

    Leave a comment:


  • Hallabutt
    replied
    1963 I believe, but why you would want to switch over is a mystery to me. What do you expect to achieve? With as little as most of our cars are driven, one could actually go for years without having to make an adjustment. I have cars with both, and worked on both types, and it seems like a waste of time to me.
    Bill

    Leave a comment:


  • Merwin
    started a topic Brakes: Brakes auto adjust

    Brakes auto adjust

    55 Commander brakes, staying with drum brakes but upgrading to auto adjust. What parts do I need? Can I use existing backing plates? Any kit/instructions available? What year did the Commander get self adjusting brakes?
    thanks
    Merwin Harstad
Working...
X