Announcement

Collapse
No announcement yet.

50 Champion Front Wheel Bearing Grease Seal

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • RadioRoy
    replied
    Originally posted by bensherb View Post
    I think he's using the old style felt seals Roy, they have no obvious lip or anything indicating the inside so the question is reasonable if you haven't installed hundreds of seals as many of us have. Either type seal, the flat side faces out, like the left drum in the pic.
    Oops. I should have stopped my response with my first line. My bad.

    Leave a comment:


  • wdills
    replied
    Yes, they are felt type seals. Thanks for the responses. Flat side out it is.

    Leave a comment:


  • bensherb
    replied
    I think he's using the old style felt seals Roy, they have no obvious lip or anything indicating the inside so the question is reasonable if you haven't installed hundreds of seals as many of us have. Either type seal, the flat side faces out, like the left drum in the pic.

    Leave a comment:


  • RadioRoy
    replied
    The one on the left is correct.

    Last edited by RadioRoy; 01-04-2020, 07:20 PM.

    Leave a comment:


  • 50 Champion Front Wheel Bearing Grease Seal

    Click image for larger version

Name:	Grease Seals.jpg
Views:	233
Size:	83.1 KB
ID:	1815795

    We are about ready to put the grease seals in the font hubs. I have looked in the manual and can't find any info on orientation. Does it matter if the flat side of the metal housing is out as shown on the left or should the lip be out as shown on the right.

    Thanks


    Attached Files
Working...
X