Announcement

Collapse
No announcement yet.

61 Hawk Wiper Motor

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Other: 61 Hawk Wiper Motor

    Fitted up the Wiper motor yesterday,
    noticed that the mounting stud & plate for the arms doesn't sit very proud of the firewall,
    I would say , almost touching, even done up fairly tightly,
    not sure if that's the norm,

    regards, Cus
    sigpic

  • #2
    So the Wiper Arm Drivers and Center "Wheel" fit too tight to the Inside of the Firewall?

    Wrong Insulators and spacers in the 3 Mounting Bracket Holes?
    Last edited by StudeRich; 01-02-2020, 05:01 PM.
    StudeRich
    Second Generation Stude Driver,
    Proud '54 Starliner Owner

    Comment


    • #3
      On closer inspection, & I also ran the motor, it does miss the wall, but not by much,
      I guess that's all it has to do, I have the original motor from my '61 & one from a '62 GT,
      the rubbers look the same,

      regards, Cus
      sigpic

      Comment

      Working...
      X