Announcement

Collapse
No announcement yet.

Parting out a 63 Hawk & have a question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 64Avanti
    replied
    I am interested in the engine frame mounts. They should be bolted on in a 63.

    David L

    Leave a comment:


  • pgothard
    replied
    Yes, it comes out with the windshield. The fastest way to remove windshield is to first remove interior garnish mouldings around windshield. Then, using a sharp box cutter, and sitting in the front seat, cut off the rubber lip of the windshield seal(that folds into the interior) all the way around the windshield. You can now easily push the windshield outward from inside. Once the windshield is removed, the exterior garnish moulding can be removed from the rubber with no problem.

    --pgothard

    Leave a comment:


  • ivorydan
    replied
    Spring Valley, WI

    Leave a comment:


  • warrlaw1
    replied
    It should come out with the windshield. It goes around the glass b4 the windshield is installed. The shop manual suggests two people to install. You may be able to push the windshield out from the inside and the trim should stay with it.

    How's the right rear fender on the hawk? I need one, but I'm in Ontario, Canada. Where are you located?

    DW

    Leave a comment:


  • Terri Smith
    started a topic Parting out a 63 Hawk & have a question

    Parting out a 63 Hawk & have a question

    Hi,

    I am parting out a 63 Hawk and cannot figure out how the exterior windshield trim comes off. Can anyone help me out?

    Thanks,
    Terri
    Ebay seller id: tarilyns
Working...
X