Announcement

Collapse
No announcement yet.

wheel rim glamor ring removal

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Flashback
    replied
    Squirt dishwahing soap with a tiny amount of water
    around under them between them and wheel. If you
    have a one way lug wrench, as comes with car, use
    it to pry them off. It won't be as apt to bend them.
    Don't pry all in one place. go around.

    Tex E. Grier

    Leave a comment:


  • N8N
    replied
    nope, they work exactly like regular hubcaps... but apparently in this case tighter They might never have been off, since it appears that they don't have to be removed to change tires or add/remove balancing weights.

    nate

    --
    55 Commander Starlight
    http://members.cox.net/njnagel

    Leave a comment:


  • Lothar
    replied
    Thanks for the reassurance. I pried on them a little bit, but they didn't want to budge. I guess its just rust and dirt thats holding them on so tight. Can I assume from what you've already said that they don't require special rims?[)]

    1950 Champion 4 Dr.
    Holdrege NE

    Leave a comment:


  • 53k
    replied
    Remove them pretty much as you would a full wheel cover. As hotwheels63r2, just don't pry too much at any point.

    Paul Johnson, Wild and Wonderful West Virginia
    '53 Commander Starliner (since 1966)
    '64 Daytona Wagonaire (original owner)
    '64 Daytona Convertible (2006)
    Museum R-4 engine
    1962 Gravely Model L (Studebaker-Packard serial plate)
    1972 Gravely Model 430 (Studebaker name plate, Studebaker Onan engine)

    Leave a comment:


  • Lothar
    started a topic wheel rim glamor ring removal

    wheel rim glamor ring removal

    I'm stripping down a 1950 Champion 2 door for parts.



    It has rims with stainless "glamor", or "beauty" rings.



    I have four good rims without rings. I assume that there are some sort of clips that hold these on. Is there a way to remove the rings from the rims without ruining them? If so, will they clip into my unringed rims?

    1950 Champion 4 Dr.
    Holdrege NE
Working...
X