Announcement

Collapse
No announcement yet.

Front axle swap '52 2r10

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Transtar60
    replied
    If I remember correctly, a guy named Rick Courtier put 1/2 ton spindles on his 2E12 and used the Turner kit on his front axle.
    I know because I got all the parts he removed.


    3E38
    4E2
    4E28
    5E13
    7E7
    8E7
    8E12
    8E28

    59 Lark
    etc

    Leave a comment:


  • roddinfamilyguy
    replied
    he doesnt have a kit for the 2r10 only half ton models and cars...asked him about it he said not enough need to make one!

    Leave a comment:


  • StudeRich
    replied
    Just buy Jim Turner's kit, and they bolt on!
    http://www.turnerbrake.com/

    It appears you may need to join SDC to know where to get important Stude. parts and good info. plus Turning Wheels is the best car club publication out there! [^]

    StudeRich
    Studebakers Northwest
    Ferndale, WA

    Leave a comment:


  • roddinfamilyguy
    started a topic Front axle swap '52 2r10

    Front axle swap '52 2r10

    does anyone know if there is another front axle that will fit with no or little modification under a 2r10? I want to keep a straight axle but want to be able to put on disc brakes with the new axle, so ford or chev or custom would be what I need. the truck want original when I got it and is in rough shape but it runs and drives and I just want it as a driver fun truck.
    kyle carlsten
Working...
X