Announcement

Collapse
No announcement yet.

Hawk seat spacers

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    When you pry up the rear of the seat, you change the leg room between the steering wheel and your legs. You also change the pitch of the seat cushion.

    I have been futzing around with tons of combinations, and have yet to find one seating position that is good for both Ellen and myself.

    There is also a difference in seating position between cars with and without Power Seats. The angle of the seat cushion tilts further backward and upward with PS over manual seats.

    Comment


    • #17
      Were these placed under the carpet to hide them, or just on top of the carpet by the factory?

      Comment


      • #18
        My 62 had wooden blocks under the front seats, and has a wooden block spacing the parking brake handle from the dashboard. I replaced the wooden blocks under the seats with grade 8 bolts and grade 8 fender-washers. Don't need the seats going anywhere.

        Comment


        • #19
          Why would the factory bother shimming seats? Seems like more of a customer preference than anything else. Sounds like something more that a dealer would do for a customer.

          Comment

          Working...
          X