Announcement

Collapse

Get more Tips, Specs and Technical Data!

Did you know... this Forum is a service of the Studebaker Drivers Club? For more technical tips, specifications, history and tech data, visit the Tech Tips page at the SDC Homepage: www.studebakerdriversclub.com/tips.asp
See more
See less

NAPA gaskets

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • NAPA gaskets

    Awhile back someone recommended a part # for some Studebaker V8 exhaust gaskets from NAPA. I did a search but was unsucessful. Anyone know the part #? Thanks again,

    Darryl C. Lewallen Clarkesville, Ga.
    Darryl C. Lewallen Clarkesville, Ga.

  • #2
    Napa manifold exhaust gasket is: F5436 Ak. Made by Dana. Its a thick
    composite mesh with inner fire steel ring.

    Tom

    '63 Avanti, zinc plated drilled & slotted 03 Mustang Cobra 13" front disc/98 GT rear brakes, 03 Cobra 17" wheels, GM alt, 97 Z28 leather seats, soon: 97 Z28 T-56 6-spd, Ported heads w/SST full flow valves, 'R3' 276 cam, Edelbrock AFB Carb, GM HEI distributor, 8.8mm plug wires
    '63 Avanti R1, '03 Mustang Cobra 13" front disc/98 GT rear brakes, 03 Cobra 17" wheels, GM alt, 97 Z28 leather seats, TKO 5-spd, Ported heads w/SST full flow valves.
    Check out my disc brake adapters to install 1994-2004 Mustang disc brakes on your Studebaker!!
    http://forum.studebakerdriversclub.c...bracket-update
    I have also written many TECH how to articles, do a search for my Forum name to find them

    Comment


    • #3
      Tom, Thank you for part number, I'll get these tommorrow.

      Darryl C. Lewallen Clarkesville, Ga.
      Darryl C. Lewallen Clarkesville, Ga.

      Comment


      • #4
        I got some of these last week, I matched them up to a manifold that i HAD from last year. (snaped the stud off.) It has motivated me to try out die grinding, I want to scribe the fire ring circle then grind to that. I am trying not to ruin the ones on my car on my first attempt/
        R

        64 Daytona HT
        64 GT R1 4sp Hawk
        Mohawk Trails Chapter SDC

        Comment


        • #5
          Are these manifold to pipe, or manifold to head? I'd be interested in opening up the pipe end of the manifold. Are right side pipes available to fit well without the heat riser.
          Mike M.

          Comment


          • #6
            man to pipe. the guy from canada that advertises in TW. will do them I think. My car came with these pipes and no heat riser valve.[8D] I wanted to make the most of them. this seems to be the bottleneck in my system.R

            64 Daytona HT
            64 GT R1 4sp Hawk
            Mohawk Trails Chapter SDC

            Comment

            Working...
            X